Setting up a Scanner in EXACT

To set up a Scanner in EXACT

Your hardware installer will probably have done this. You should only change the scanner setup if new hardware is installed or scanning is not working.

1. From the ‘Contacts’ tab, click on the button to open the ‘Select Source’ window:

   

   This will show all scanner and camera drivers that have been installed on your PC.

2. Click on the required Source.
3. Click on the Select button.
4. You have now selected the scanner driver. Unless you change scanners, you will not have to do it again.

Note that you also need to specify the Scanning Format.

To configure the scanning format

This example is for PDF format.

1. Select Configure > Practice Settings.
2. Under the Format for Scanned Documents header, select the PDF (multipage support) option:

   

   Note that the indication of which scanned documents file types support single / multi-page scanning.

3. Select OK.